• Mix wall putty with 20-25% clean water slowly under hand stirring, Continue stirring till a uniform paste is formed.
• Apply first coat uniformly on already moistened surface with the help of putty blade or spray gun. Allow the surface to dry for minimum 8 hours and then apply a second coat. Allow drying for 6 to 8 hours preferably overnight for complete drying depending on ambient temperature and humidity condition.
• After drying, if needed, the surface should be rubbed with proof 300-320 mesh emery paper.
• Always prepare the required quantity of putty & use within 2 to 3 hours of mixing with water.
• Coverage capacity 7 to 8 sft / kg 2 coats. on reasonably good cement plastered wall surface.
• Substrate Preparation Sand surface is needed for better adhesion.
• Self Life 4 months in unopened container when kept away from direct sunlight.
• Store in a cool dry place
• The surface is now ready to paint, for application of icoat of aeco Primer & 2coats of acuraa Interior Emulsion or aactor Acrylic Washable Distemper.

• New masonry surfaces must be allowed to cure completely. Surface should be free from any loose paint dust or grease growth of fungus, algas or moss should be removed by wire brushing or water.
• aagrow tek Wall Care is factory premixed dry powder mix consisting of white cement. Specially selected sieved sand polymer and special fillers.
• Dry Density 900 grms./ liter. Dilution : Cleaned Water Pot life : 2 hours after mixing water. Maximum Thickness : 3-4 mm per 2 coats.
• Dry time : 6-8 hours may very due to change in the temperature and humidity. Coverage : 15-20sft per kg./one coat.
• For fine & smooth finishing apply 2 coats of aagrowtek Wall Care and apply lcoat of aeco Primer and final coat to be finished with acuraa Interior Emulsion for External use avalon Exterior Emulsion.
• Shelf life : 6 months from the date of manufactured sealed, unopened sacks.

• Mix wall putty with 20-25% clean water slowly under hand stirring, Continue stirring till a uniform paste is formed.
• Apply first coat uniformly on already moistened surface with the help of putty blade or trowel. Allow drying for 6 to 8 hours preferably overnight for complete drying depending on ambient temperature and humidity condition.
• Always prepare the required quantity of material use within 2 to 3 hours of mixing with water.
• Coverage capacity 3 to 5 sft / kg 1 coat. on reasonably good cement plastered wall surface.
• Substrate Preparation Sand surface is needed for better adhesion.
• Self Life :4 months in unopened container when kept away from direct sunlight.
• Store in a cool dry place.
• The surface is now ready to paint, for application of 1coat of aeco Primer & Exterior purpose use 2 coats of avalon Exterior Emulsion or Interior purpose use acuraa Interior Emulsion.

• Mix wall putty with 20-25% clean water slowly under hand stirring, Continue stirring till a uniform paste is formed.
• Apply first coat uniformly on already moistened surface with the help of putty blade or spray gun. Allow the surface to dry for minimum 8 hours and then apply a second coat. Allow drying for 6 to 8 hours preferably overnight for complete drying depending on ambient temperature and humidity condition.
• After drying, if needed, the surface should be rubbed with proof 300-320 mesh emery paper.
• Always prepare the required quantity of putty & use within 2 to 3 hours of mixing with water.
• Coverage capacity 7 to 8 sft / kg 2 coats. on reasonably good cement plastered wall surface.
• Substrate Preparation Sand surface is needed for better adhesion.
• Self Life : 4 months in unopened container when kept away from direct sunlight. Store in a cool dry place 9. The surface is now ready to paint, for application of icoat of aeco.

• New masonry surfaces must be allowed to cure completely.
• Surface should be free from any loose paint dust or grease growth of fungus, algas or moss should be removed by wire brushing or water.
• Patch holes and cracks where paint has been scrapped or is to be fill with crack filler material and allow it to dry.
• aeco primer Acrylic Wall Primer 2 parts of water may be added to 3 parts primer and applied over well dried coating.
• aeco Primer can be applied by brush with roller or spray gun.
• Then apply aeco Primer followed by finish coats for excellent with acuraa Interior Emulsion / avalon Exterior Emulsion.
• Coverage : 90-100sft. per lltr. per coat depends on surface.
• Self Life :1 Year unopened container.

• New masonry surfaces must be allowed to cure completely.
• Surface should be free from any loose paint dust or grease growth of fungus, algal or moss should be removed by wire brushing or water.
• Patch holes and cracks where paint has been scrapped or is to be fill with crack filler material and allow it to dry.
• apply 1 coat of aeco primer Acrylic Wall Primer.
• win coat Interior Emulsion 3 parts may be added to 2 parts of water and apply over well dried coating by brush with roller or spraygun.
• A gap of 4-6 hours should be given for re-coating.
• Coverage : 90-120sft. per lltr. per coat depend on surface.
• Smooth Finish Offer. 9. Self Life :1 Year unopened container.

• New masonry surfaces must be allowed to cure completely.
• Surface should be free from any loose paint dust or grease growth of fungus, algas or moss should be removed by wire brushing or water.
• Patch holes and cracks where paint has been scrapped or is to be filled with crack filler material and allow it to dry.
• Apply 1 coat of aeco primer Acrylic Wall Primer.
• Win Coat Exterior Emulsion 3 parts may be added to 2 parts of water and apply over well-dried coating by a brush with a roller or spray gun.
• A gap of 4-6 hours should be given for re-coating.
• Coverage: 90-120sft. per 1ltr. per coat depend on surface.
• Viscosity supply 100-112 Krebs units on picometer viscometer @ 30°.
• Self Life : 1 Year unopened container.

Aagrow Tek Cem (Premium Limewash) is an effective surface covering for the wide range of water absorptive surfaces. Aagrow Tek Cem is vapor-permeable and allows a building to “breathe”. Limewash is robust and, in the proper number, of coats, may consolidate and improve the condition of the underlying substrate. Limewash is suitable and long-lasting. Limewash is beautiful in either its brilliant white. Limewash has always been, and remains, a most effective way to protect, maintain and beautify the surface of historically significant structures.